Drop the ' · Calendar' / ' · Day' page indicators from the subpage
headers - at the wordmark's size they wrapped the lockup to two lines
on phones, and the active nav pill already names the page. On mobile
the hamburger is now position:fixed at the viewport's top-right so nav
follows the user down the page (below the filter-sheet scrim and map
modal); the brand row reserves the corner so the lockup can't slide
beneath it.
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
The glyph previously sat outside the h1, centered by the flex row
against the whole title block - so its position relative to the
wordmark shifted between pages with and without a tagline. Move it
inside the h1 (and inside the home link on server-rendered pages) and
lay the lockup out as its own flex row, so mark and wordmark are always
aligned to each other; the tagline now sits under the full lockup.
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
The glyph previously sat outside the h1, centered by the flex row
against the whole title block - so its position relative to the
wordmark shifted between pages with and without a tagline. Move it
inside the h1 (and inside the home link on server-rendered pages) and
lay the lockup out as its own flex row, so mark and wordmark are always
aligned to each other; the tagline now sits under the full lockup.
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
Swap the header wordmark from the lowercase Inter treatment to a
monospace system stack (ui-monospace / SF Mono / Cascadia / Menlo /
Consolas), bump it 22->26px (compact headers 18->21px), and restore
the capital T by dropping the lowercase transform. No webfonts.
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
The mark is a quantized climb through the temperature-band tokens
(cold -> cool -> normal -> warm -> hot -> very-hot) to a rec-hot
terminal at a dashed record line, on the dark rounded tile.
- favicon.svg (canonical) + favicon-16/32/48.png fallbacks; the 16px
raster drops the whisper strata and record dash so the climb survives
- apple-touch-icon.png 180 rendered edge-to-edge (iOS supplies rounding)
- maskable 192/512 scale the artwork 0.78 about center so every element
clears the 40%-radius circular safe zone; any-purpose 192/512 and the
512 OG logo.png regenerated; reused filenames cache-busted with ?v=2
- header lockup: inline glyph referencing var(--cold) etc so a palette
change propagates, beside a lowercase 650-weight wordmark
- PNGs are palette-quantized with the band/chrome hexes pinned exact;
full asset set is ~20 KB
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
The mark is a quantized climb through the temperature-band tokens
(cold -> cool -> normal -> warm -> hot -> very-hot) to a rec-hot
terminal at a dashed record line, on the dark rounded tile.
- favicon.svg (canonical) + favicon-16/32/48.png fallbacks; the 16px
raster drops the whisper strata and record dash so the climb survives
- apple-touch-icon.png 180 rendered edge-to-edge (iOS supplies rounding)
- maskable 192/512 scale the artwork 0.78 about center so every element
clears the 40%-radius circular safe zone; any-purpose 192/512 and the
512 OG logo.png regenerated; reused filenames cache-busted with ?v=2
- header lockup: inline glyph referencing var(--cold) etc so a palette
change propagates, beside a lowercase 650-weight wordmark
- PNGs are palette-quantized with the band/chrome hexes pinned exact;
full asset set is ~20 KB
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
conftest redirected AUDIT_DIR and ERROR_DIR to a throwaway tmp dir but left
ACCESS_DIR pointing at the repo's logs/access/. The request-logging middleware
runs under TestClient too, so every suite run appended its deliberate error-path
requests (401/404/409/422/502/503) to the live access log that the ops
dashboard reads, inflating its traffic and error tallies. Point ACCESS_DIR at
the tmp dir like the other two.
Co-authored-by: root <root@vmi3417050.contaboserver.net>
The ops dashboard marked subscription-notifier DOWN ~2/3 of the time after the
notifier was gated to a single leader worker. It judged the daemon by whether
its thread was present on whichever worker answered /api/v2/metrics, but only
the leader runs it — so polls landing on the other two workers saw no thread and
reported DOWN for a perfectly healthy notifier. Per-worker thread checks can't
describe a single-leader daemon, and worse, they could no longer distinguish a
real crash from a normal non-leader.
Report it by liveness instead: the notifier stamps a heartbeat (timestamp +
expected interval) into the shared metrics store each loop iteration, including
once at startup so the dashboard shows it up immediately after a restart. Since
the beat lives in the shared SQLite store, any worker's metrics response carries
it, so the dashboard sees the notifier's health whichever worker it polls.
- metrics.py: both stores record/expose heartbeats (SQLite reuses the meta
table, so every worker's beats share one file); snapshot() converts each beat
to a server-computed age so readers needn't reconcile clock skew.
- notify.py: beat at loop start and every wake.
- dashboard.py: judge heartbeat daemons by freshness (up to 2 missed intervals
before DOWN, with beat age shown); neighbor-warmer keeps its per-worker thread
check, which is correct since every worker runs it.
- Tests: heartbeat store/snapshot shape + cross-worker sharing; dashboard
fresh/stale/missing rendering and the unchanged warmer check. 194 passed.
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Google Search Console flags city pages with 'Missing field item (in
itemListElement)': the country crumb has no page of its own, so its
ListItem was emitted without the required item URL. Google only allows
the final ListItem to omit item, so drop unlinked intermediate crumbs
from the structured data (the visible breadcrumb is unchanged) and
renumber positions. Shared helper now builds the BreadcrumbList for
both the city and records pages, with a regression test parsing the
emitted JSON-LD.
Claude-Session: https://claude.ai/code/session_01KdTZCjpLeD26ZbXe6ApjpR
* Serve the app on thermograph.org at root; redirect emigriffith.dev/thermograph
Move Thermograph to its own domain. thermograph.org serves the app at its root,
and emigriffith.dev/thermograph* permanently redirects there (prefix stripped,
so deep links map straight across).
- app.py: BASE now supports an empty root prefix. THERMOGRAPH_BASE=/ (or empty)
yields BASE="" so routes sit at "/", "/calendar", "/api/v2/…" with no double
slashes; the bare-base redirect is skipped and the static mount falls back to
"/". Non-empty values keep the existing "/thermograph" sub-path behavior
unchanged (backward compatible).
- deploy/Caddyfile: add a thermograph.org site block reverse-proxying to the
uvicorn on 127.0.0.1:8137; turn emigriffith.dev's /thermograph handler into a
permanent redirect to thermograph.org.
- deploy/thermograph.env.example: default THERMOGRAPH_BASE=/.
- DEPLOY.md: document the two-domain layout and that deploy.sh does not ship the
Caddyfile or env — those are applied on the VPS by hand.
The frontend already uses base-relative URLs, so it follows the root base with no
changes. Verified both modes locally (root serves /, /calendar, /api/v2/*; the
/thermograph sub-path still redirects bare→slash and 404s at root).
* Add dashboard (#144)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Add dashboard #2 (#145)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Run prod on 3 uvicorn workers with a shared metrics store
A single slow upstream weather fetch (cache-miss during an open-meteo/NASA
degradation) blocked the one uvicorn worker and took the whole app down for
~2 min — real users got aborted connections. Give prod concurrency headroom so
one slow request can't freeze the rest.
- deploy/thermograph.service: worker count is env-driven (`--workers ${WORKERS}`,
default 1); prod sets WORKERS=3 in /etc/thermograph.env. Dev's separate
--user unit is untouched (stays single-worker).
- metrics.py: with multiple workers, per-process counters would split the tally
and the ops dashboard (polls one random worker) would see only a fraction.
Add a shared SQLite store selected by THERMOGRAPH_METRICS_DB so every worker
tallies into one place; unset keeps the zero-dependency in-memory store for
dev/tests/single-worker. Public API and snapshot shape unchanged.
- The unit defaults THERMOGRAPH_METRICS_DB and clears it on each (re)start via
ExecStartPre, so bumping WORKERS can never silently fragment the dashboard and
"since start" tallies keep their old meaning.
- Tests: cover the SQLite store — cross-worker aggregation, window roll-off,
and env-based selection. Full suite: 178 passed.
Note: applying to prod also needs the unit reinstalled + WORKERS=3 in
/etc/thermograph.env — deploy.sh only pulls+restarts, it doesn't reinstall the
systemd unit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016mRqdHWRdUjEvEdfwig3wg
---------
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* Serve the app on thermograph.org at root; redirect emigriffith.dev/thermograph
Move Thermograph to its own domain. thermograph.org serves the app at its root,
and emigriffith.dev/thermograph* permanently redirects there (prefix stripped,
so deep links map straight across).
- app.py: BASE now supports an empty root prefix. THERMOGRAPH_BASE=/ (or empty)
yields BASE="" so routes sit at "/", "/calendar", "/api/v2/…" with no double
slashes; the bare-base redirect is skipped and the static mount falls back to
"/". Non-empty values keep the existing "/thermograph" sub-path behavior
unchanged (backward compatible).
- deploy/Caddyfile: add a thermograph.org site block reverse-proxying to the
uvicorn on 127.0.0.1:8137; turn emigriffith.dev's /thermograph handler into a
permanent redirect to thermograph.org.
- deploy/thermograph.env.example: default THERMOGRAPH_BASE=/.
- DEPLOY.md: document the two-domain layout and that deploy.sh does not ship the
Caddyfile or env — those are applied on the VPS by hand.
The frontend already uses base-relative URLs, so it follows the root base with no
changes. Verified both modes locally (root serves /, /calendar, /api/v2/*; the
/thermograph sub-path still redirects bare→slash and 404s at root).
* Add dashboard (#144)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Add dashboard #2 (#145)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Run prod on 3 uvicorn workers with a shared metrics store
A single slow upstream weather fetch (cache-miss during an open-meteo/NASA
degradation) blocked the one uvicorn worker and took the whole app down for
~2 min — real users got aborted connections. Give prod concurrency headroom so
one slow request can't freeze the rest.
- deploy/thermograph.service: worker count is env-driven (`--workers ${WORKERS}`,
default 1); prod sets WORKERS=3 in /etc/thermograph.env. Dev's separate
--user unit is untouched (stays single-worker).
- metrics.py: with multiple workers, per-process counters would split the tally
and the ops dashboard (polls one random worker) would see only a fraction.
Add a shared SQLite store selected by THERMOGRAPH_METRICS_DB so every worker
tallies into one place; unset keeps the zero-dependency in-memory store for
dev/tests/single-worker. Public API and snapshot shape unchanged.
- The unit defaults THERMOGRAPH_METRICS_DB and clears it on each (re)start via
ExecStartPre, so bumping WORKERS can never silently fragment the dashboard and
"since start" tallies keep their old meaning.
- Tests: cover the SQLite store — cross-worker aggregation, window roll-off,
and env-based selection. Full suite: 178 passed.
Note: applying to prod also needs the unit reinstalled + WORKERS=3 in
/etc/thermograph.env — deploy.sh only pulls+restarts, it doesn't reinstall the
systemd unit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016mRqdHWRdUjEvEdfwig3wg
---------
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Prod runs 3 uvicorn workers, but the in-process subscription notifier was
started in every worker's lifespan (it was written assuming a single-worker
deploy). Its sweep fetches recent-forecast/archive data from Open-Meteo on a
15-min timer independent of any request, so running it 3× tripled the
background upstream load against a shared quota — the source of the overnight
429/503 rate-limit errors in logs/errors, and 3× redundant subscription scans.
Elect one worker to own the notifier via a non-blocking exclusive flock on a
lockfile (THERMOGRAPH_SINGLETON_LOCK): the first worker wins and holds the fd
for its lifetime; others stand down; the OS releases the lock if the leader
dies, so a restart re-elects cleanly. Unset (single worker / dev / tests)
always wins, so behavior there is unchanged. Mirrors the shared-metrics store's
env-selected cross-worker coordination.
The neighbor warmer stays per-worker on purpose: each worker drains its own
request-fed queue, so gating it would leave non-leader queues undrained.
- backend/singleton.py: flock-based leader election (claim()).
- backend/app.py: gate notify.start() on singleton.claim().
- deploy/thermograph.service: default THERMOGRAPH_SINGLETON_LOCK to
data/notifier.lock (needs the unit reinstalled on prod to take effect).
- deploy/thermograph.env.example: document it alongside WORKERS.
- Tests: leader election — single-worker default, first-wins, idempotent
re-claim, second-holder stands down, re-election after release. 183 passed.
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Prod runs 3 uvicorn workers, but the in-process subscription notifier was
started in every worker's lifespan (it was written assuming a single-worker
deploy). Its sweep fetches recent-forecast/archive data from Open-Meteo on a
15-min timer independent of any request, so running it 3× tripled the
background upstream load against a shared quota — the source of the overnight
429/503 rate-limit errors in logs/errors, and 3× redundant subscription scans.
Elect one worker to own the notifier via a non-blocking exclusive flock on a
lockfile (THERMOGRAPH_SINGLETON_LOCK): the first worker wins and holds the fd
for its lifetime; others stand down; the OS releases the lock if the leader
dies, so a restart re-elects cleanly. Unset (single worker / dev / tests)
always wins, so behavior there is unchanged. Mirrors the shared-metrics store's
env-selected cross-worker coordination.
The neighbor warmer stays per-worker on purpose: each worker drains its own
request-fed queue, so gating it would leave non-leader queues undrained.
- backend/singleton.py: flock-based leader election (claim()).
- backend/app.py: gate notify.start() on singleton.claim().
- deploy/thermograph.service: default THERMOGRAPH_SINGLETON_LOCK to
data/notifier.lock (needs the unit reinstalled on prod to take effect).
- deploy/thermograph.env.example: document it alongside WORKERS.
- Tests: leader election — single-worker default, first-wins, idempotent
re-claim, second-holder stands down, re-election after release. 183 passed.
Co-authored-by: root <root@vmi3417050.contaboserver.net>
* Serve the app on thermograph.org at root; redirect emigriffith.dev/thermograph
Move Thermograph to its own domain. thermograph.org serves the app at its root,
and emigriffith.dev/thermograph* permanently redirects there (prefix stripped,
so deep links map straight across).
- app.py: BASE now supports an empty root prefix. THERMOGRAPH_BASE=/ (or empty)
yields BASE="" so routes sit at "/", "/calendar", "/api/v2/…" with no double
slashes; the bare-base redirect is skipped and the static mount falls back to
"/". Non-empty values keep the existing "/thermograph" sub-path behavior
unchanged (backward compatible).
- deploy/Caddyfile: add a thermograph.org site block reverse-proxying to the
uvicorn on 127.0.0.1:8137; turn emigriffith.dev's /thermograph handler into a
permanent redirect to thermograph.org.
- deploy/thermograph.env.example: default THERMOGRAPH_BASE=/.
- DEPLOY.md: document the two-domain layout and that deploy.sh does not ship the
Caddyfile or env — those are applied on the VPS by hand.
The frontend already uses base-relative URLs, so it follows the root base with no
changes. Verified both modes locally (root serves /, /calendar, /api/v2/*; the
/thermograph sub-path still redirects bare→slash and 404s at root).
* Add dashboard (#144)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Add dashboard #2 (#145)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Run prod on 3 uvicorn workers with a shared metrics store
A single slow upstream weather fetch (cache-miss during an open-meteo/NASA
degradation) blocked the one uvicorn worker and took the whole app down for
~2 min — real users got aborted connections. Give prod concurrency headroom so
one slow request can't freeze the rest.
- deploy/thermograph.service: worker count is env-driven (`--workers ${WORKERS}`,
default 1); prod sets WORKERS=3 in /etc/thermograph.env. Dev's separate
--user unit is untouched (stays single-worker).
- metrics.py: with multiple workers, per-process counters would split the tally
and the ops dashboard (polls one random worker) would see only a fraction.
Add a shared SQLite store selected by THERMOGRAPH_METRICS_DB so every worker
tallies into one place; unset keeps the zero-dependency in-memory store for
dev/tests/single-worker. Public API and snapshot shape unchanged.
- The unit defaults THERMOGRAPH_METRICS_DB and clears it on each (re)start via
ExecStartPre, so bumping WORKERS can never silently fragment the dashboard and
"since start" tallies keep their old meaning.
- Tests: cover the SQLite store — cross-worker aggregation, window roll-off,
and env-based selection. Full suite: 178 passed.
Note: applying to prod also needs the unit reinstalled + WORKERS=3 in
/etc/thermograph.env — deploy.sh only pulls+restarts, it doesn't reinstall the
systemd unit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016mRqdHWRdUjEvEdfwig3wg
---------
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* Serve the app on thermograph.org at root; redirect emigriffith.dev/thermograph
Move Thermograph to its own domain. thermograph.org serves the app at its root,
and emigriffith.dev/thermograph* permanently redirects there (prefix stripped,
so deep links map straight across).
- app.py: BASE now supports an empty root prefix. THERMOGRAPH_BASE=/ (or empty)
yields BASE="" so routes sit at "/", "/calendar", "/api/v2/…" with no double
slashes; the bare-base redirect is skipped and the static mount falls back to
"/". Non-empty values keep the existing "/thermograph" sub-path behavior
unchanged (backward compatible).
- deploy/Caddyfile: add a thermograph.org site block reverse-proxying to the
uvicorn on 127.0.0.1:8137; turn emigriffith.dev's /thermograph handler into a
permanent redirect to thermograph.org.
- deploy/thermograph.env.example: default THERMOGRAPH_BASE=/.
- DEPLOY.md: document the two-domain layout and that deploy.sh does not ship the
Caddyfile or env — those are applied on the VPS by hand.
The frontend already uses base-relative URLs, so it follows the root base with no
changes. Verified both modes locally (root serves /, /calendar, /api/v2/*; the
/thermograph sub-path still redirects bare→slash and 404s at root).
* Add dashboard (#144)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Add dashboard #2 (#145)
* Auto-submit IndexNow on deploy when the URL set changes (#130)
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
* Add ops metrics endpoint + SSH/Termux dashboard (#131)
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
* Dashboard: run under the app venv, not the box's default python3 (#132)
The box's default python3 can be a build without _sqlite3 (pyenv 3.10 here), so
./scripts/dash crashed on import. Prefer the repo's .venv interpreter (the Python
the server itself runs on, which always has sqlite3); fall back to python3/python.
Also make the sqlite3 import in dashboard.py optional so a fallback interpreter
degrades to empty cache/accounts panels instead of crashing, and point the
'make dashboard' target at the wrapper.
* Dashboard: redraw live view in place so it stops scrolling to the bottom (#133)
The live loop did a full clear-and-reprint each refresh; when the output is taller
than the terminal (common on a phone) that scrolls the view to the bottom every tick.
Redraw from the top instead: hide the cursor, clear once, then each frame move to home
and rewrite line-by-line (clear-to-EOL + clear-below), capping the body to the window
height so it never prints more lines than fit and never scrolls. Restore the cursor on
exit; piped (non-TTY) output prints plain frames.
* Dashboard: make the live view a scrollable in-place pager (#134)
The live mode is now an alt-screen pager (like top/less): it shows only the latest
snapshot, you scroll it with swipe/arrows/jk/PgUp-PgDn/g/G, and each refresh replaces
the page in place while keeping your scroll position — nothing gets appended below and
the view is never yanked to the top or bottom. On exit it restores the cursor, leaves
the alternate screen, and resets the terminal mode.
--once still prints a single static snapshot (also used automatically when stdout/stdin
aren't a terminal, e.g. piping); --json unchanged.
* Metrics: don't count the dashboard's own /api/v2/metrics polling (#135)
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
* Dashboard: add a STORAGE section (archive + DB sizes) (#136)
Show on-disk storage: the parquet archives (with history/recent split), the derived
SQLite DB, and the accounts SQLite DB individually, plus a total. Archive bytes are
summed during the existing TTL-cached cache scan; DB sizes include the -wal/-shm
sidecars (WAL holds recent writes, so the base file alone understates the footprint).
Drop the now-redundant 'payload db' line from CACHE.
* Dashboard: show STORAGE sizes in fixed GB (0.01 GB floor) (#137)
The auto-scaling formatter only switched to GB once a value passed 1 GB, so the
archives read as MB and the DBs as KB. Format the STORAGE section in fixed GB with two
decimals and a 0.01 GB floor (so the small databases stay visible instead of rounding
to 0.00). Memory readouts keep the auto-scaling formatter.
* Dashboard: show STORAGE under 50 MB in MB, GB above (#138)
Values below 50 MB now render as MB with one decimal (no KB), so the databases read
naturally (derived 7.7MB, accounts 0.4MB) instead of 0.01GB; 50 MB and up stay in GB
with two decimals. Renames the helper _gb -> _storage_size to match.
* Dashboard: move STORAGE MB->GB cutoff to 500 MB (#139)
Values below 500 MB show in MB (one decimal); 500 MB and up in GB.
* Dashboard: accounts totals only; log client IPs per request (#140)
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
* Dashboard: wrap-aware pager so the header stops scrolling off (#141)
The pager counted one screen row per logical line, but on a narrow phone many lines
wrap to two rows — so a page printed more physical rows than the terminal had, scrolling
the top (title + CACHE header) off-screen with no way to scroll back to it. Measure each
line's wrapped height and fit a page to the real physical-row budget; page/End step by
what's actually visible; read the true tty size (not shutil, which honors stale
COLUMNS/LINES). Status line is clipped to one row.
* Add log storage size to the ops dashboard STORAGE section (#142)
The STORAGE section reported parquet archives and both SQLite DBs but
omitted the logs/ footprint, so the "total" understated real disk use.
Add a recursive _tree_size helper and a "logs" row measuring the whole
logs/ tree (audit + errors + access JSONL plus stray *.log files), broken
out by stream, and fold it into the STORAGE total. Flows through --json
automatically via read_storage.
* Dashboard: show last-10-minute traffic per category (#143)
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
* Run prod on 3 uvicorn workers with a shared metrics store
A single slow upstream weather fetch (cache-miss during an open-meteo/NASA
degradation) blocked the one uvicorn worker and took the whole app down for
~2 min — real users got aborted connections. Give prod concurrency headroom so
one slow request can't freeze the rest.
- deploy/thermograph.service: worker count is env-driven (`--workers ${WORKERS}`,
default 1); prod sets WORKERS=3 in /etc/thermograph.env. Dev's separate
--user unit is untouched (stays single-worker).
- metrics.py: with multiple workers, per-process counters would split the tally
and the ops dashboard (polls one random worker) would see only a fraction.
Add a shared SQLite store selected by THERMOGRAPH_METRICS_DB so every worker
tallies into one place; unset keeps the zero-dependency in-memory store for
dev/tests/single-worker. Public API and snapshot shape unchanged.
- The unit defaults THERMOGRAPH_METRICS_DB and clears it on each (re)start via
ExecStartPre, so bumping WORKERS can never silently fragment the dashboard and
"since start" tallies keep their old meaning.
- Tests: cover the SQLite store — cross-worker aggregation, window roll-off,
and env-based selection. Full suite: 178 passed.
Note: applying to prod also needs the unit reinstalled + WORKERS=3 in
/etc/thermograph.env — deploy.sh only pulls+restarts, it doesn't reinstall the
systemd unit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_016mRqdHWRdUjEvEdfwig3wg
---------
Co-authored-by: root <root@vmi3417050.contaboserver.net>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
A failed web push (e.g. VAPID key mismatch -> 401/403) was swallowed: /push/test still
returned 202 and the UI showed 'Sent', while the only trace was a journald WARNING.
Now: push.send logs failures to the errors JSONL (phase=push) so they show up like other
errors; /push/test returns a 'failed' count; and the 'Send test' button reports 'No
device' / 'Sent' / 'Failed' from the real result. Document the VAPID env vars (missing
from thermograph.env.example) and how to pin/diagnose them.
A failed web push (e.g. VAPID key mismatch -> 401/403) was swallowed: /push/test still
returned 202 and the UI showed 'Sent', while the only trace was a journald WARNING.
Now: push.send logs failures to the errors JSONL (phase=push) so they show up like other
errors; /push/test returns a 'failed' count; and the 'Send test' button reports 'No
device' / 'Sent' / 'Failed' from the real result. Document the VAPID env vars (missing
from thermograph.env.example) and how to pin/diagnose them.
A failed web push (e.g. VAPID key mismatch -> 401/403) was swallowed: /push/test still
returned 202 and the UI showed 'Sent', while the only trace was a journald WARNING.
Now: push.send logs failures to the errors JSONL (phase=push) so they show up like other
errors; /push/test returns a 'failed' count; and the 'Send test' button reports 'No
device' / 'Sent' / 'Failed' from the real result. Document the VAPID env vars (missing
from thermograph.env.example) and how to pin/diagnose them.
The inline header (logo + name + tagline + °F/°C + Sign in + six nav tabs) only
fits comfortably above ~1200px. Below that it squeezed the title/tagline into a
one-word-per-line sliver — worst around 700–1100px. The previous stopgap (trimming
tab padding) removed the scrollbar but not the crush.
Now the header is genuinely responsive:
- ≥1200px: full inline header with the tagline.
- 1081–1199px: inline nav, tagline hidden (title + controls with breathing room).
- ≤1080px: fold nav, °F/°C and account into the hamburger — a clean compact row
(logo + name + hamburger).
The header-collapse rules moved from the ≤640px block to ≤1080px; the body keeps
its own ≤640px phone rules. Also drops the now-unneeded 641–1000px tab-padding hack.
No horizontal overflow at any width.
Put Alerts in the main navigation (after Climate) across the interactive pages
and the SEO/climate pages, so it's a discoverable entry point rather than only the
header bell. The bell stays; this is an additional way in.
The signed-out /alerts gate now leads with a clear "What are weather alerts?"
explainer — what they do, how the percentile threshold works, and an example —
above the sign-in / create-account button, so visitors understand the feature
before signing in.
The extra nav item pushed the inline header past ~800px into a horizontal
scrollbar; trim the tab padding in the 641–1000px band so the row fits again
(phones already collapse into the hamburger).
Put Alerts in the main navigation (after Climate) across the interactive pages
and the SEO/climate pages, so it's a discoverable entry point rather than only the
header bell. The bell stays; this is an additional way in.
The signed-out /alerts gate now leads with a clear "What are weather alerts?"
explainer — what they do, how the percentile threshold works, and an example —
above the sign-in / create-account button, so visitors understand the feature
before signing in.
The extra nav item pushed the inline header past ~800px into a horizontal
scrollbar; trim the tab padding in the 641–1000px band so the row fits again
(phones already collapse into the hamburger).
On prod (served at root) the dashboard first probes /thermograph/api/v2/metrics before
falling back to root; that 404 was classified as inbound 'other' and shown as an error —
the monitor polluting the traffic it displays. Two fixes: classify any */api/v2/metrics
path as 'metrics' (excluded) whatever prefix it arrives under; and cache the working
metrics URL in the dashboard so it stops re-probing the failing base every refresh.
Add a rolling short-window view alongside the since-start totals. metrics.py
keeps per-minute buckets (epoch-minute -> {key: count}) for inbound categories
and outbound sources, summed over the last 10 minutes on snapshot() and exposed
as inbound_recent / outbound_recent / window_minutes. Cheap and bounded — at most
WINDOW+1 tiny dicts, pruned as minutes roll off; self-polling still excluded.
The dashboard's TRAFFIC section now renders that count as a dim column next to
each row's total (header reads "total · last 10m"); idle sources show "-".
Dashboard ACCOUNTS section now shows only totals (users, active/total subscriptions,
notifications, push subs) — the per-user and per-subscription lists are gone, and the
dashboard no longer queries that PII at all.
Backend: add a per-request access log (logs/access/access-<date>.jsonl) recording the
client IP (real IP via the left-most X-Forwarded-For hop when proxied behind Caddy,
else the peer address), method, path, status, and category. Static assets and the
dashboard's own metrics polling are skipped. Best-effort, never raises into the request
path — retained for later traffic/IP analysis.
The ops dashboard polls the metrics endpoint every few seconds; counting those hits
just shows the monitor watching itself and inflates the inbound totals. Skip the
'metrics' category in record_inbound (so it's excluded from inbound_total too), and
hide it in the dashboard's inbound list defensively.
Adds observability for the running app, viewable over SSH (e.g. Termux):
- backend/metrics.py: thread-safe, best-effort in-process counters for inbound
requests (per category) and outbound calls (per external source), plus a
phase->source map and snapshot(). Hooked into climate._request (outbound, all
six weather/geocode sources) and the existing revalidate_static middleware
(inbound). Never raises into the request path.
- GET /api/v2/metrics: token-gated JSON of the counters + warm-queue depth +
thread names/uptime/pid. Returns 404 unless a valid THERMOGRAPH_METRICS_TOKEN
is presented or the request is direct loopback with no proxy X-Forwarded-*
header, so ops data is never exposed through Caddy on the public domain.
- scripts/dashboard.py (+ scripts/dash, make dashboard): stdlib-only terminal
dashboard. Reads cache (parquet + SQLite), accounts (users + active
subscriptions), and system resources (/proc + systemd) directly, and pulls
traffic from the metrics endpoint over loopback. Live refresh, --once, --json;
mobile-terminal width. Paths resolve relative to the script so the same tool
works on the LAN dev and prod VPS checkouts.
- Monitoring sections in DEPLOY.md / DEPLOY-DEV.md; unit tests for the counters.
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
Hook the production deploy (deploy/deploy.sh) to ping IndexNow after the health
check passes, so new/changed pages reach Bing/DuckDuckGo/Yandex without a manual
run. Best-effort — wrapped so it can never fail a deploy — and it sources
/etc/thermograph.env so its key matches the one the running service serves.
To avoid re-blasting ~14k URLs on every code push, indexnow.py gains a
--if-changed mode gated by a signature of the URL set (persisted to
data/indexnow_state.txt): code-only deploys skip; a deploy that adds or removes a
city submits. `make indexnow` still forces a full submit.
Faster search-engine indexing for the ~14k climate/city/record URLs:
- IndexNow (backend/indexnow.py): instantly notify Bing/DuckDuckGo/Yandex of new
or changed URLs. Per-host key resolved env → gitignored file → generated (mirrors
push.py), served at /{key}.txt, and echoed in submissions. `submit_all()` + a
`make indexnow` CLI push every indexable URL, batched under the 10k cap. Google
doesn't use IndexNow, so it stays on the sitemap.
- Sitemap: replace the per-request today() <lastmod> (which churns every fetch and
trains crawlers to ignore lastmod) with a stable content-build date; factor the
URL list into public_paths() shared with IndexNow so the two never drift.
- Search-console verification: render google-site-verification + msvalidate.01
<meta> tags from env into every page's <head> — the SEO pages via base.html.j2
and the static pages (incl. the homepage Google verifies) via _page().
- Docs: env example documents the three new vars; .gitignore ignores the key.
Tests: key-file route, stable single-date lastmod, IndexNow payload/batching, and
verification meta on both SEO and static pages.
Faster search-engine indexing for the ~14k climate/city/record URLs:
- IndexNow (backend/indexnow.py): instantly notify Bing/DuckDuckGo/Yandex of new
or changed URLs. Per-host key resolved env → gitignored file → generated (mirrors
push.py), served at /{key}.txt, and echoed in submissions. `submit_all()` + a
`make indexnow` CLI push every indexable URL, batched under the 10k cap. Google
doesn't use IndexNow, so it stays on the sitemap.
- Sitemap: replace the per-request today() <lastmod> (which churns every fetch and
trains crawlers to ignore lastmod) with a stable content-build date; factor the
URL list into public_paths() shared with IndexNow so the two never drift.
- Search-console verification: render google-site-verification + msvalidate.01
<meta> tags from env into every page's <head> — the SEO pages via base.html.j2
and the static pages (incl. the homepage Google verifies) via _page().
- Docs: env example documents the three new vars; .gitignore ignores the key.
Tests: key-file route, stable single-date lastmod, IndexNow payload/batching, and
verification meta on both SEO and static pages.
The server-rendered SEO pages shared base.html.j2's nav but carried no JS, so
they lacked the °F/°C toggle and account/bell, and their temperatures were baked
as dual-unit strings that couldn't respond to a toggle.
- Load units.js + account.js + climate.js on base.html.j2, so every SEO page gets
the same header as the interactive pages (nav + °F/°C toggle + account + bell).
- Emit each temperature as <span class="temp" data-temp-f> (default °F text, real
for crawlers/no-JS); climate.js rewrites them to the active unit on load and on
toggle. Tint classes stay pinned to absolute °F. Drops the inline "(NN°C)".
- Make account.js base-aware: derive the app base from import.meta.url so its
api/v2 fetches and the alerts links resolve from deep /climate/{slug} URLs
instead of 404ing. Equivalent on the depth-1 interactive pages.
- Default the unit from the browser locale for first-time visitors (no stored
pref): en-US → °F, everyone else → °C. A stored choice always wins.
The server-rendered SEO pages shared base.html.j2's nav but carried no JS, so
they lacked the °F/°C toggle and account/bell, and their temperatures were baked
as dual-unit strings that couldn't respond to a toggle.
- Load units.js + account.js + climate.js on base.html.j2, so every SEO page gets
the same header as the interactive pages (nav + °F/°C toggle + account + bell).
- Emit each temperature as <span class="temp" data-temp-f> (default °F text, real
for crawlers/no-JS); climate.js rewrites them to the active unit on load and on
toggle. Tint classes stay pinned to absolute °F. Drops the inline "(NN°C)".
- Make account.js base-aware: derive the app base from import.meta.url so its
api/v2 fetches and the alerts links resolve from deep /climate/{slug} URLs
instead of 404ing. Equivalent on the depth-1 interactive pages.
- Default the unit from the browser locale for first-time visitors (no stored
pref): en-US → °F, everyone else → °C. A stored choice always wins.
The account button in the hamburger dropdown spanned the full panel width,
so a signed-in user's email rendered as a large centered bar dominating the
menu. Make it a compact chip that hugs its label and centers beside the bell
instead: drop the full-width/flex rules, tighten the button padding, and cut
the name truncation from 16ch to 12ch. The 40px min-height stays for the tap
target.
On phones the calendar/compare distribution columns are narrow (~38px), and the
in-bar "Max NNN° / Min NNN°" pill clipped three-figure values — e.g. "Max 103°"
rendered as "Max 10". Add a max-width:640px rule that drops the .ct-range font
from 9px to 8px and tightens the key↔value gap (5→2px) and side padding, so
three-figure highs/lows stay fully visible. Scoped to mobile; desktop unchanged.
Verified with a headless render of the shared .ct-strip at 360/390/430px (no
clipping on any three-figure value) and at 800/1920px (rule doesn't apply).
- Compact the mobile menu: narrower panel (208px), tighter rows, and the nav
list now stretches to the panel width and left-aligns (it was centering because
the base .view-nav align-self:center overrode the panel's stretch).
- Stylish separation between entries: an inset hairline between each nav item,
suppressed around the active pill so nothing crosses it.
- Rename the "Day" view to "Day Detail" across the app nav, and add it to the
climate/city page nav (base.html.j2), which was missing it.
- Compact the mobile menu: narrower panel (208px), tighter rows, and the nav
list now stretches to the panel width and left-aligns (it was centering because
the base .view-nav align-self:center overrode the panel's stretch).
- Stylish separation between entries: an inset hairline between each nav item,
suppressed around the active pill so nothing crosses it.
- Rename the "Day" view to "Day Detail" across the app nav, and add it to the
climate/city page nav (base.html.j2), which was missing it.
On phones the header spanned two rows: the title block plus a control bar of
the °F/°C toggle, bell, account and hamburger. Wrap the nav in a .nav-panel
inside the <details> menu and inject the °F/°C toggle and account/bell into that
panel instead of into the header row. On desktop the panel is display:contents,
so the inline top bar renders exactly as before (order restored via flex order);
on phones the panel becomes a right-anchored, viewport-clamped dropdown and the
header collapses to a single row (logo + name + hamburger, tagline hidden).
The viewport clamp also fixes the SEO/city pages, whose menu dropdown previously
ran off-screen.
On phones the header spanned two rows: the title block plus a control bar of
the °F/°C toggle, bell, account and hamburger. Wrap the nav in a .nav-panel
inside the <details> menu and inject the °F/°C toggle and account/bell into that
panel instead of into the header row. On desktop the panel is display:contents,
so the inline top bar renders exactly as before (order restored via flex order);
on phones the panel becomes a right-anchored, viewport-clamped dropdown and the
header collapses to a single row (logo + name + hamburger, tagline hidden).
The viewport clamp also fixes the SEO/city pages, whose menu dropdown previously
ran off-screen.
- Mobile header: the title column was collapsing to a sliver behind the F/C +
bell + account + hamburger cluster, forcing one-word-per-line text and floating
the logo at the tall column's center. Give the title (logo + name + tagline) the
whole first row (flex-basis 0 floored by a min-width so it sits beside the logo,
not below it) and let the controls wrap to a control bar below; top-align the
logo with the name. The small lone hamburger on SEO pages still fits the title row.
- Add a Climate link to the interactive view nav so the hamburger reaches the
city/records section. Account + subscription (bell) icons live in the control bar.
- Collapse the view navigation into a hamburger menu on phones. The nav is
wrapped in a <details> (pure CSS, no JS — so it works on the crawlable SEO
pages too): transparent (display:contents) on desktop so the tabs render
inline, a dropdown behind a hamburger under 640px. The °F/°C toggle, bell and
account stay in the header bar; units.js/account.js now anchor their injected
controls on the wrapper.
- Replace the header logo: the ▚ glyph was a rotated Unicode char that fonts
rendered inconsistently (warped). Use a crisp inline SVG of the two accent
squares (currentColor) across all headers.
- Month pages: turn the plain "Visiting <city> in <month>?" line into a bordered
callout with a CTA button, matching the city page's travel box.
Verified in Firefox and Chromium at desktop and 390px, light and dark: desktop
nav inline, mobile hamburger opens the dropdown, logo crisp, travel note styled.
- Collapse the view navigation into a hamburger menu on phones. The nav is
wrapped in a <details> (pure CSS, no JS — so it works on the crawlable SEO
pages too): transparent (display:contents) on desktop so the tabs render
inline, a dropdown behind a hamburger under 640px. The °F/°C toggle, bell and
account stay in the header bar; units.js/account.js now anchor their injected
controls on the wrapper.
- Replace the header logo: the ▚ glyph was a rotated Unicode char that fonts
rendered inconsistently (warped). Use a crisp inline SVG of the two accent
squares (currentColor) across all headers.
- Month pages: turn the plain "Visiting <city> in <month>?" line into a bordered
callout with a CTA button, matching the city page's travel box.
Verified in Firefox and Chromium at desktop and 390px, light and dark: desktop
nav inline, mobile hamburger opens the dropdown, logo crisp, travel note styled.
Complete the forecast fallback chain: Open-Meteo → MET Norway → stale cache. When
both live sources are unavailable, serve the last cached recent/forecast bundle
even if it is past its 1-hour TTL — an hours-old bundle (which still carries the
recent observed days MET Norway lacks) beats a hard 503, mirroring the archive
path's stale-serve in _load_history.
The stale bundle is returned WITHOUT rewriting it, so its mtime stays old and the
next request retries the live sources first rather than treating the stale copy as
fresh. Only when there is no cache at all does the typed WeatherUnavailable surface.
The forecast path had no backup — unlike history, which falls back to NASA POWER.
When Open-Meteo's forecast API was rate-limited or down, the recent/forecast
bundle (and every endpoint that grades future days) failed with a 503.
Add MET Norway (yr.no) Locationforecast as a keyless, global forecast backup,
mirroring the NASA POWER role for history:
- _metno_to_frame: aggregates MET Norway's sub-daily timeseries into the daily
schema, converting units (°C→°F, mm→in, m/s→mph) and deriving feels-like from
the NWS heat index / wind chill (MET has no gusts or apparent temperature).
Precip prefers the 1-hour block and falls back to the 6-hour block so the
hourly→6-hourly resolution switch never double-counts.
- _fetch_forecast_metno: the backup fetch, with the ToS-required identifying
User-Agent and coordinates rounded to 4 decimals.
- _load_recent_forecast: on any Open-Meteo forecast failure, try MET Norway
before surfacing the error; a shared rate limit still raises the typed,
daily-aware WeatherUnavailable.
MET Norway is forecast-only (no recent past days), so it's a degraded-but-working
fallback: the forecast / day-ahead views keep serving during an Open-Meteo outage.
Tests cover the daily aggregation + unit conversion (incl. the no-double-count
precip rule) and the fallback wiring.
The Wikipedia "Read more →" link in the notable-weather section could break
between "Read" and "more" at narrow widths. Join it with non-breaking spaces so
it stays on one line.
Claude-Session: https://claude.ai/code/session_01XXxmNFy9cZ6Gh8Y9thZn62
The per-month records section listed only the warmest and coldest temperature.
Extend it to a card per metric (High, Low, Feels-like, Humidity, Wind, Gust,
Precip), each showing that calendar month's record high and low with the date.
Precip is special-cased: a per-day record low is just zero, and the dry-streak
helper would bridge year boundaries on month-filtered rows, so the wettest and
driest sides use the month's largest and smallest total accumulation, dated to
the year. Partial current months (< 26 days) are excluded so an unfinished month
can't win "driest" on a fraction of its rainfall.
Reuses the records page's card grid, so it's already vertical on mobile.
Claude-Session: https://claude.ai/code/session_01XXxmNFy9cZ6Gh8Y9thZn62
The month and season records tables showed only the record high (of the daytime
high) and the record low (of the overnight low) — one extreme each. Show both
ends of both metrics: for the daytime high, its record hottest (▲) and the
coldest a day ever stayed (▼, its record-low high); for the overnight low, its
mildest night (▲, its record-high low) and its record low (▼). All four already
came out of all_time_records; they were just being dropped.
Restructure each table to Period · Daytime high · Overnight low, with each metric
cell carrying two tinted, dated chips (▲ warmest / ▼ coldest). Fits mobile in
three columns; the all-time cards already showed both extremes, so this brings
the per-period tables in line.
Emi Griffith